LIST OF PUBLICATIONS, 2003-2004

ADCON - PAPERS AND PUBLICATIONS 2003-2004

 

Articles in international scientific journals

 

1.      Najim, K., A. Poznyak and E. Ikonen (2004). Optimization based on a team of automata with binary outputs. Automatica, 40(8), pp. 1349-1359.

2.      Ikonen, E. and K. Najim (2004). Process identification using distributed Wiener logic processors. Differential Equations & Dynamical Systems, 12, no. 1-2, pp. 171-194.

3.      Najim, K., P. Del Moral and E. Ikonen (2004). An improved version of the McMurtryFu reinforcement learning scheme. International Journal of Systems Science, 34, no. 1, pp. 37–47.

  1. Hätönen, J. and R. Ylinen (2003). Polynomial systems theory applied to the analysis and design of multidimensional systems. International Journal of Applied Mathematics and Computer Science, 13, no. 1, pp. 15-27.

 

 

Chapters in scientific books

 

1.      Heikkilä T., M. Sallinen, L. Rannanjärvi and M. Rintala (2003). Holonic shot blasting system. In: M. Deen (Ed.): Agent-Based Manufacturing - Advances in the Holonic Approach, Springer Verlag. pp. 254 – 302.

2.      Ahokangas M., T. Heikkilä, T. Taipale, J. Uimonen and T. Niiranen (2003). Quality of service measurements. In: Lempiäinen J. and M. Manninen (Eds.): UMTS Radio Network Planning, Optimisation and QoS Management, Kluwer Academic Publishers. pp. 305 - 336.

 

 

Articles in preprints and proceedings of international meetings

 

  1. Ahvenlampi, T., R. Rantanen, M. Tervaskanto and U. Kortela (2004). Enhancing the controllability of kappa number using gray-box modeling. 2nd IFAC Workshop on Advanced Fuzzy/Neural Control (AFNC’04). September 16-17, 2004. Oulu, Finland. pp. 85-90.
  2. Benyó, I., Z. Hímer, U. Kortela and J. Kovács (2004). Cascade GPC for superheated steam temperature control. IASTED International Conference on Modelling, Identification and Control (MIC 2004), February 23-25, 2004, Grindelwald, Switzerland. pp. 572-576. Available on CD.
  3. Benyó, I., J. Kovács, J. Mononen and U. Kortela (2004). Modelling of steam temperature dynamics of a superheater. Proceedings of the 16th European Simulation Symposium (ESS2004), October 17-20, 2004, Budapest, Hungary. pp. 120-124.
  4. Hímer, Z., V. Wertz, J. Kovács and U. Kortela (2004). Neuro-fuzzy model of flue gas oxygen content. IASTED International Conference on Modelling, Identification and Control (MIC 2004), February 23-25, 2004, Grindelwald, Switzerland. pp. 98-102. Available on CD.
  5. Hímer, Z., G. Dévényi, J. Kovács and U. Kortela (2004). Control of combustion based on neuro-fuzzy model (2004). IASTED International Conference on Applied Simulation and Modelling (AMS 2004), June 28-30, 2004, Rhodes, Greece. pp. 13-17. Available on CD.
  6. Hímer, Z., G. Dévényi, J. Kovács and U. Kortela (2004). Fuzzy control of combustion with genetic learning automata. 16th European Simulation Symposium and Exhibition (ESS2004), October 17-20, 2004, Budapest, Hungary. pp. 69-74.

7.      Hímer, Z., J. Kovács, I. Benyó And U. Kortela (2004). Neuro-fuzzy modeling and genetic algorithms optimization for flue gas oxygen control. 2nd IFAC Workshop on Advanced Fuzzy/Neural Control (AFNC’04), September 16-17, 2004, Oulu, Finland. pp. 121-126.

8.      Ikonen, E., P. Del Moral and K. Najim (2004). A genealogical decision tree solution to optimal control problems. IFAC Workshop on Advanced Fuzzy/Neural Control (AFNC'04), September 16-17, 2004, Oulu, Finland.

9.      Ikonen, E (2004). Learning predictive control using probabilistic models. IFAC Workshop on Advanced Fuzzy/Neural Control (AFNC'04), September 16-17, 2004, Oulu, Finland.

10.  Ikonen, E., K. Najim, D. Aït-Kadi and U. Kortela (2003). Finding an optimal replacement policy in a multi-teacher environment using learning automata. 3rd Triennial Conference on Applied Automation Systems (AAS 2003), September 18-20, 2003, Ohrid, Republic of Macedonia, pp. 59-68 (invited paper)

11.  Ikonen, E., K. Najim and D. Aït-Kadi (2003). Learning automata in maintenance optimization. Int. Conf. Industrial Engineering and Production Management (IEPM'03), May 26–28, 2003, Porto, Portugal, pp. 1-10.

12.  Ikonen, E. (2003). Optimization using learning automata and confidence probabilistics. Preprints Intelligent Control Systems and Signal Processing (IFAC ICONS 2003), April 8–11, 2003, Faro, Portugal, pp. 197–202.

  1. Kovács J., I. Benyó and Gy. Lipovszki (2004). RST simulator – an advanced tool for control education. IASTED International Conference Applied Simulation and Modelling (AMS 2004), June 28-30, 2004, Rhodes, Greece. pp. 238-242. Available on CD.
  2. Kovács J., I. Benyó I and Gy. Lipovszki (2004). Simulation tools in control engineering education. 16th European Simulation Symposium and Exhibition (ESS2004), October 17-20, 2004, Budapest, Hungary. pp. 335-340.

15.  Leppäkoski, K., M. Paloranta and E. Ikonen (2004). Comparing two nonlinear structures for secondary air process modelling. Control 2004, September 6-9, 2004, Bath, U.K.

  1. Leppäkoski, K., J. Mononen, and J. Kovács (2003). Adaptable model of flue-gas oxygen content. In: M. H. Hamza (Ed.) Proceedings of the12th IASTED International Conference Applied Simulation and Modelling, September 3-5, 2003, Marbella, Spain. pp. 431-436.

17.  Lerssi, I., J. Mononen and T. Karjalainen (2004). Classical signal analysis of the fuel feed system in CFB boiler. Proceedings of the 7th IASTED International Conference on Power and Energy Systems (PES2004), November 28 – December 1, 2004, Clearwater Beach, FL, USA. pp. 303-308.

18.  Mononen, J., E. Ikonen and M. Paloranta (2004). Identification of an integrated superheater using Wiener models. Proceedings of the 7th IASTED International Conference on Power and Energy Systems (PES 2004), November 28 - December 1, 2004, Clearwater Beach, Florida, USA. pp. 430-435.

  1. Paloranta M., I. Benyo, K. Leppäkoski and U. Kortela (2004). Time Delay Compensating Control of Flue-Gas Oxygen-Content in FBB. Proceedings of the 7th IASTED International Conference on Power and Energy Systems (PES2004), November 28 – December 1, 2004, Florida, USA.       
  2. Paloranta, M., K. Leppäkoski and J. Mononen (2003). A simulator-based control design case for a full-scale bubbling fluidized bed boiler. Proceedings of the 12th IASTED International Conference Applied Simulation and Modelling, September 3- 5, 2003, Marbella, Spain. pp. 30-35.
  3. Puolakka, H-M. and U. Kortela (2004). Applicability of the chip compaction model in the controlling of the digester. The 11th Control Systems Conference, June 14-18, 2004, Quebec City, Canada. pp. 13-16.

22.  Rantanen, R., E. Similä and T. Ahvenlampi (2004). Modeling of kappa number in Downflow Lo-Solids cooking using Gustafson’s model. The 11th Control Systems Conference, June 14-18, 2004, Quebec City, Canada. pp. 17-20.

23.  Sallinen M. and T. Heikkilä (2003). Reduction of spatial uncertainties as a criteria for sensing planning of hand-eye calibration. Proceedings of SPIE Intelligent Robots and Computer Vision XXI: Algorithms, Techniques, and Active Vision, October 27-31 2003, Providence, RI USA, Proceedings of SPIE Vol. 5267 (2003), pp. 182 - 193.

  1. Tervaskanto, M., T. Ahvenlampi, T. Hietanen and U. Kortela (2003). Modeling of compound pulp quality in thermo mechanical pulping. IASTED International Conference on Modelling, Identification and Control (MIC 2003). February 11-13, 2003. Innsbruck, Austria. pp. 283-287.

25.  Tervaskanto, M., T. Ahvenlampi, R. Rantanen and U. Kortela (2003). Modeling of alkali and temperature profiles in continuous Kamyr digester using neural networks. Proceedings of the 12th IASTED International Conference Applied Simulation and Modelling, September 3-5, 2003. Marbella, Spain. pp. 514-519.

26.   Tervaskanto, M., R. Rantanen, T. Ahvenlampi and Z. Himer (2004). Quality prediction in kraft cooking using soft computing methods. The 11th Control Systems Conference, June 14-18, 2004, Quebec City, Canada. pp. 241-244.

 

 

 

Scientific monographies

 

  1. Najim, K., E. Ikonen and D. Aït-Kadi (2004). Stochastic Processes: Estimation, Optimization and Analysis. Kogan Page Science, London, U.K. (text book) XX p.

 

 

Articles in preprints or proceedings of national meetings

 

  1. Aaltonen, H. and U. Kortela (2003). Massasuspension käyttäytyminen erilaisissa sekoitus- ja virtausolosuhteissa. Automaatio ’03, SAS julkaisusarja no 27, September 9 – 11, 2003, Helsinki, Finland. pp. 133-138.
  2. Benyó, I., G. Lipovszki and J. Kovács (2003). Advanced control: simulation tools in Labview environment. The 6th IFAC Symposium on Advances in Control Education (ACE 2003), June 16-18, 2003, Oulu, Finland. pp. 275-279.
  3. Leppäkoski K., M. Paloranta, J. Kovàcs & E. Niemitalo (2003). NOx emission reducing control design by decreasing flue-gas oxygen-content. Automaatio ‘03, September 9-11, 2003, Finnish Society of Automation, Helsinki, Finland, pp. 205-210.
  4. Mononen, J. and A. Kettunen (2003). Epälineaaristen identifiointi- ja mallintamismenetelmien soveltaminen – integroidun tulistimen tarkastelu. Automaatio ’03, SAS julkaisusarja no 27, September 9 – 11, 2003, Helsinki, Finland, pp. 85-90.
  5. Rantanen, R. and H-M. Puolakka (2004). Control Systems 2004 – konferenssi Quebec Cityssä Kanadassa 14 – 18.6.2004. Matkakertomus. Automaatioväylä 5/04. pp. 38-39.

7.      Rantanen, R., T. Ahvenlampi, E. Similä and U. Kortela (2003). Kappaprofiili ja pakkautuminen jatkuvatoimisessa keittimessä. Automaatio '03, SAS julkaisusarja no 27, September 9 – 11, 2003, Helsinki, Finland. pp. 163-168.

8.      Rantanen, R., T. Ahvenlampi and U. Kortela (2003). Kappa number profile in continuous cooking - applying Gustafson's model to softwood and hardwood pulping process. The 4th Biennial Johan Gullichsen Colloquium. September 10, 2003. Espoo, Finland. pp. 83-92.

9.      Sallinen M. and T. Heikkilä (2003). Robotics research in Japan: from tea automaton to humanoid robots. Automaatio ‘03, September 9 - 11, 2003, Helsinki, Finland. pp. 203 - 328. (in Finnish)

  1. Tervaskanto, M., H-M. Puolakka, T. Ahvenlampi, J. Hiltunen and U. Kortela (2003). Jatkuvatoimisen sellunkeiton diagnostiikka. Automaatio ’03, SAS julkaisusarja no 27, September 9 – 11, 2003, Helsinki, Finland. pp. 169-174.

 

Articles published in laboratory series or other material

 

  1. Aaltonen, H. (Ed.) (2003). Activity report from 1.1.2002 to 31.12.2002. Systems Engineering Laboratory, Report C no. 28, Oulu, Finland. 36 p.
  2. Honkanen, S (2003). Prosessiteekkaraiden opintojen pitkittyminen - indikaattorina säätö- ja systeemitekniikan perusteet I-kurssin suoritusajankohta. Pro Forma Didactica. Oulu, Oulun seudun ammattikorkeakoulu, Ammatillinen opettajakorkeakoulu. Thesis. November 2003, 40 p.

3.      Honkanen, S. 470460A Säätö- ja systeemiteknikan perusteet I (2003). Exercise material, 54 p.

4.      Honkanen, S. 470461A Säätö- ja systeemiteknikan perusteet II (PO) (2003). Exercise material, 2003. 40 p.

5.      Honkanen, S. 470304S Prosessiautomaation perusteet (2004). Lecture material, 50 p.

6.      Honkanen, S. 470460A Säätö- ja systeemiteknikan perusteet I (2004). Exercise material, 68 p.

7.      Honkanen, S. 470461A Säätö- ja systeemiteknikan perusteet II (PO) (2004). Exercise material, 43 p.

8.      Honkanen, S. TL5022 Systeemiteorian perusteet (2004). Lecture material, 28 p.

9.      Ikonen, E. Mallipohjainen säätösuunnittelu – LTI-systeemit (2004). Lecture material, 34 p.

10.  Rantanen, R., H-M. Puolakka, T. Latvala, J. Hiltunen ja U. Kortela (2003). Jatkuvatoimisen keiton mallintaminen ja toiminnan kehittäminen - Jakema. Loppuraportti. University of Oulu, Systems Engineering Laboratory. Report A no. 29, Oulu, Finland. 93 p.